Rack & Asset Management Guide
Learn how to register Racks, which are physical units within a datacenter, and manage server placement status.
📋 Overview
Rack Management digitally simulates the physical space occupied by servers within a datacenter. This allows for efficient management of floor space utilization and immediate identification of physical locations during equipment inspections.
🛠️ Key Management Features
1. Rack Registration
Create a virtual rack by specifying an ID and a datacenter.
- Rack ID: Assign a distinguishable number within the center (e.g., R-01, A-12).
- Unit (U) Setup: Set a standard 42U or custom height.
2. Server Placement (Drag & Drop)
You can click a registered server and place it in a specific Unit position on the rack.
- Consistency with Actual Location: For management efficiency, ensure settings match the actual physical placement.
3. Power & Load Management
Prevent overloads by checking the estimated total power consumption of equipment connected to each rack.
🔍 Usage Scenarios
- Locating Failed Servers: If an issue occurs, verify which rack and unit the server is in and relay the exact location to on-site workers.
- Determining Available Space: When introducing new servers, search for empty rack spaces to select the optimal placement location.
💡 Important Notes
- Avoid Duplication: You cannot register more than one server in the same Unit space.
API Reference
For detailed API specifications of this feature, refer to the separate guide.
🔧 Troubleshooting
| Symptom | Cause | Solution |
|---|---|---|
| A server cannot be placed in a specific unit | Another server already occupies that unit | Duplicate placement in one unit is not allowed—choose an empty unit instead. |
| The server you want to place is not in the drag list | The server has not been registered yet | Register the server first, then drag it onto the rack. |
| The estimated power consumption shows an overload | The total power of equipment connected to the rack exceeds the limit | Distribute some equipment to other racks to reduce the load. |
| The on-site server location differs from the screen | The rack layout does not match the actual physical placement | Re-set the unit placement to match the real physical location. |
Version: 1.0
Last Updated: 2026-03-19
Source: giipv3/public/help/rack.en.md